![]() ![]() Screwfix customers rate this product 4.5/5. Brake controller kits often come with wiring, as well. Order Maypole MP021 7-Pin N-Type Trailer Board Plug 12V at. The green wire connects with the taillights, the yellow wire connects with the reverse lights, and the red wire connects with the left light. The brown wire connects with the right light. Walmart sells a 7-way connector kit made by Hopkins which includes all the wiring you need. In this 7-pin trailer wiring diagram, most of the wire configuration is changed. This is also fused with a self resetting breaker, rating 20A - 30A depending on your setup. Brakes - this is the power feed wire (the standard color is blue, should be 10ga) which would come from your brake controller in the cab. Ground (you can go to the chassis at the rear, or run up front, any good clean ground will work) 12v+ feed (20A fused, recommended to use a self resetting breaker) You can tap into those using wire taps, or I believe there is a splitter available which goes in where the rear harness joint is near the rear axle, which can be modified to suit this purpose. ![]() On the rear cross-member the factory rear light harness contains the following wires (on our trucks they match standard trailer colors, I found it easiest to trace them from the lights): You'll have to run a couple of wires from up front. It provides more power than the 4-pin connector, making it ideal for larger trailers with multiple accessories on board. This is by far the best wiring FAQ I've found for this subject. Do you need a 7-pin trailer wiring plug The 7-pin trailer plug is a great way to ensure that all of your RV’s accessories have power and are functioning properly. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |